Thank you for choosing VinylRex for your decal & Apparel needs.
Please feel free to share your installed decals on Facebook @TheVinylRex
DRY - Installation Instructions: (try to find a spot with no wind, like a parking garage or home garage)
1) Clean the area thoroughly with rubbing alcohol (or solution below). Glass cleaner (may) leave a residue behind that might prevent the decal from adhering well.
2) Rub a squeegee or credit card firmly across the decal through the clear transfer tape to prepare it for application.
- This ensures the decal will cling to the transfer tape.
3) Slowly peel the paper backing off the decal. If the decal clings to the backing, slowly replace the paper backing and repeat Step 2.
4) If the backing clings to the decal, you may want to pull from a different direct, or separate the decal and backing with a fine point/blade.
5) Carefully lower the decal onto the surface and rub it in place firmly with a squeegee or credit card. Slowly peel the clear transfer tape off at an angle. Be careful
not to pull the decal off the surface. If decal pulls away from the surface repeat Step 4.
WET - Installation Instructions: (try to find a spot with no wind)
1) Clean the area thoroughly with rubbing alcohol (or solution below). Glass cleaner (may) leave a residue behind that might prevent the decal from adhering well.
2) Rub a squeegee or credit card firmly across the decal through the clear transfer tape to prepare it for application.
- This ensures the decal will cling to the transfer tape.
3) Spray application surface with application solution (mixture listed below).
4) Slowly peel the paper backing off the decal. If the decal clings to the backing, slowly replace the paper backing and repeat Step 2.
5) If the backing clings to the decal, you may want to pull from a different direct, or separate the decal and backing with a fine point/blade.
6) Spray decal lightly with solution (mixture listed below).
7) Carefully lower the decal onto the surface and position as desired. Rub it in place firmly with a squeegee or credit card.
8) Allow time for solution to dry – you may want to move your vehicle into the sun at this point.
9) Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If decal pulls away from the surface repeat from step 5.
Application Solution Mixture: (For every 20oz of water): (1/4 Teaspoon blue Dawn dish soap) and (1/2 Teaspoon >70% isopropyl alcohol)
(John 13: 34 – 45)